B085A2DC8B0CE81559A954729F6B20E1

Cisco SISE 300-715 PDF Dumps Updated [2022] For Passing 300-715 Exam 2022

Cisco SISE 300-715 PDF Dumps Updated [2022] For Passing 300-715 Exam

Best good solution 2022  to pass 300-715 Implementing and Configuring Cisco Identity Services Engine (SISE) exam with the updated 300-715 pdf dumps of DumpsBase. For all, 300-715 dumps V14.02 are available with 189 practice exam questions and answers, which will provide you with all needed study stuff, top level 300-715 practice questions and answers to pass the 300-715 Implementing and Configuring Cisco Identity Services Engine Exam in the first try.


Check Cisco SISE 300-715 Free Dumps First

1. An administrator is adding a switch to a network that is running Cisco ISE and is only for IP Phones The phones do not have the ability to authenticate via 802 1X.

Which command is needed on each switch port for authentication?

2. A network administrator must configura endpoints using an 802 1X authentication method with EAP identity certificates that are provided by the Cisco ISE When the endpoint presents the identity certificate to Cisco ISE to validate the certificate, endpoints must be authorized to connect to the network.

Which EAP type must be configured by the network administrator to complete this task?

3. Which advanced option within a WLAN must be enabled to trigger Central Web Authentication for Wireless users on AireOS controller?

4. Which two actions occur when a Cisco ISE server device administrator logs in to a device? (Choose two)

5. Refer to the exhibit.

An engineer is configuring Cisco ISE for guest services They would like to have any unregistered guests redirected to the guest portal for authentication then have a CoA provide them with full access to the network that is segmented via firewalls

Why is the given configuration failing to accomplish this goal?

6. When creating a policy within Cisco ISE for network access control, the administrator wants to allow different access restrictions based upon the wireless SSID to which the device is connecting .

Which policy condition must be used in order to accomplish this?

7. A network administrator notices that after a company-wide shut down, many users cannot connect their laptops to the corporate SSID .

What must be done to permit access in a timely manner?

8. An engineer tests Cisco ISE posture services on the network and must configure the compliance module to automatically download and install on endpoints.

Which action accomplishes this task for VPN users?

9. Refer to the exhibit.

Which switch configuration change will allow only one voice and one data endpoint on each port?

10. DRAG DROP

Drag the descriptions on the left onto the components of 802.1X on the right.

11. Which two methods should a sponsor select to create bulk guest accounts from the sponsor portal? (Choose two)

12. Which use case validates a change of authorization?

13. A Cisco ISE administrator needs to ensure that guest endpoint registrations are only valid for one day When testing the guest policy flow, the administrator sees that the Cisco ISE does not delete the endpoint in the Guest Endpoints identity store after one day and allows access to the guest network after that period .

Which configuration is causing this problem?

14. There is a need within an organization for a new policy to be created in Cisco ISE. It must validate that a specific anti-virus application is not only installed, but running on a machine before it is allowed access to the network .

Which posture condition should the administrator configure in order for this policy to work?

15. An administrator adds a new network device to the Cisco ISE configuration to authenticate endpoints to the network. The RADIUS test fails after the administrator configures all of the settings in Cisco ISE and adds the proper configurations to the switch .

What is the issue"?

16. An organization is hosting a conference and must make guest accounts for several of the speakers attending. The conference ended two days early but the guest accounts are still being used to access the network .

What must be configured to correct this?

17. A network administrator is currently using Cisco ISE to authenticate devices and users via 802 1X There is now a need to also authorize devices and users using EAP-TLS .

Which two additional components must be configured in Cisco ISE to accomplish this'? (Choose two.)

18. DRAG DROP

Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.

19. An engineer is configuring a guest password policy and needs to ensure that the password complexity requirements are set to mitigate brute force attacks .

Which two requirement complete this policy? (Choose two)

20. Which two task types are included in the Cisco ISE common tasks support for TACACS+ profiles? (Choose two)

21. An engineer is using Cisco ISE and configuring guest services to allow wireless devices to access the network .

Which action should accomplish this task?

22. What sends the redirect ACL that is configured in the authorization profile back to the Cisco WLC?

23. DRAG DROP

Drag and drop the description from the left onto the protocol on the right that is used to carry out system authentication, authentication, and accounting.

24. An administrator is adding network devices for a new medical building into Cisco ISE. These devices must be in a network device group that is identifying them as "Medical Switch" so that the policies can be made separately for the endpoints connecting through them .

Which configuration item must be changed in the network device within Cisco ISE to accomplish this goal?

25. An engineer is designing a BYOD environment utilizing Cisco ISE for devices that do not support native supplicants.

Which portal must the security engineer configure to accomplish this task?

26. An administrator needs to give the same level of access to the network devices when users are logging into them using TACACS+ However, the administrator must restrict certain commands based on one of three user roles that require different commands

How is this accomplished without creating too many objects using Cisco ISE?

27. Which two ports do network devices typically use for CoA? (Choose two)

28. When configuring an authorization policy, an administrator cannot see specific Active Directory groups present in their domain to be used as a policy condition. However, other groups that are in the same domain are seen What is causing this issue?

29. An administrator is configuring a switch port for use with 802 1X What must be done so that the port will allow voice and multiple data endpoints?

30. DRAG DROP

31. Which two roles are taken on by the administration person within a Cisco ISE distributed environment? (Choose two.)

32. Which Cisco ISE deployment model provides redundancy by having every node in the deployment configured with the Administration. Policy Service, and Monitoring personas to protect from a complete node failure?

33. What is a characteristic of the UDP protocol?

34. Which command displays all 802 1X/MAB sessions that are active on the switch ports of a Cisco Catalyst switch?

35. Users in an organization report issues about having to remember multiple usernames and passwords. The network administrator wants the existing Cisco ISE deployment to utilize an external identity source to alleviate this issue .

Which two requirements must be met to implement this change? (Choose two.)

36. What is the deployment mode when two Cisco ISE nodes are configured in an environment?

37. Which RADIUS attribute is used to dynamically assign the Inactivity active timer for MAB users from the Cisco ISE node?

38. Which two ports must be open between Cisco ISE and the client when you configure posture on Cisco ISE? (Choose two).

39. Which two features are available when the primary admin node is down and the secondary admin node has not been promoted? (Choose two.)

40. Refer to the exhibit.

In which scenario does this switch configuration apply?

41. DRAG DROP

Select and Place

42. Which configuration is required in the Cisco ISE authentication policy to allow Central Web Authentication?

43. Which statement about configuring certificates for BYOD is true?

44. Which two events trigger a CoA for an endpoint when CoA is enabled globally for ReAuth? (Choose two.)

45. Refer to the exhibit:

Which command is typed within the CU of a switch to view the troubleshooting output?

46. Which two fields are available when creating an endpoint on the context visibility page of Cisco IS? (Choose two)

47. An engineer is configuring Cisco ISE and needs to dynamically identify the network endpoints and ensure that endpoint access is protected .

Which service should be used to accomplish this task?

48. An engineer is tasked with placing a guest access anchor controller in the DMZ .

Which two ports or port sets must be opened up on the firewall to accomplish this task? (Choose two.)

49. What does the dot1x system-auth-control command do?

50. What are two components of the posture requirement when configuring Cisco ISE posture? (Choose two)

51. A user reports that the RADIUS accounting packets are not being seen on the Cisco ISE server.

Which command is the user missing in the switch’s configuration?

52. An administrator is configuring a Cisco ISE posture agent in the client provisioning policy and needs to ensure that the posture policies that interact with clients are monitored, and end users are required to comply with network usage rules.

Which two resources must be added in Cisco ISE to accomplish this goal? (Choose two)

53. A network security engineer needs to configure 802.1X port authentication to allow a single host to be authenticated for data and another single host to be authenticated for voice .

Which command should the engineer run on the interface to accomplish this goal?

54. An employee logs on to the My Devices portal and marks a currently on-boarded device as ‘Lost’.

Which two actions occur within Cisco ISE as a result oí this action? (Choose two)

55. Which two components are required for creating a Native Supplicant Profile within a BYOD flow? (Choose two)

56. Which Cisco ISE service allows an engineer to check the compliance of endpoints before connecting to the network?

57. Which are two characteristics of TACACS+? (Choose two)

58. When setting up profiling in an environment using Cisco ISE for network access control, an organization must use non-proprietary protocols for collecting the information at layer 2 .

Which two probes will provide this information without forwarding SPAN packets to Cisco ISE? {Choose two.)

59. An organization has a fully distributed Cisco ISE deployment When implementing probes, an administrator must scan for unknown endpoints to learn the IP-to-MAC address bindings. The scan is complete on one FPSN. but the information is not available on the others .

What must be done to make the information available?

60. An engineer is configuring sponsored guest access and needs to limit each sponsored guest to a maximum of two devices. There are other guest services in production that rely on the default guest types .

How should this configuration change be made without disrupting the other guest services currently offering three or more guest devices per user?

Tags

You may like these posts

Show more

Post a Comment

0 Comments
* Please Don't Spam Here. All the Comments are Reviewed by Admin.