12.9.1 Packet Tracer – Implement a Subnetted IPv6 Addressing Scheme
Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only
Addressing Table
| Device | Interface | IPv6 Address | Link-local Address |
|---|---|---|---|
| R1 | G0/0 | 2001:db8:acad:00c8::1/64 | fe80::1 |
| R1 | G0/1 | 2001:db8:acad:00c9::1/64 | fe80::1 |
| R1 | S0/0/0 | 2001:db8:acad:00cc::1/64 | fe80::1 |
| R2 | G0/0 | 2001:db8:acad:00ca::1/64 | fe80::2 |
| R2 | G0/1 | 2001:db8:acad:00cb::1/64 | fe80::2 |
| R2 | S0/0/0 | 2001:db8:acad:00cc::2/64 | fe80::2 |
| PC1 | NIC | Auto Config | |
| PC2 | NIC | Auto Config | |
| PC3 | NIC | Auto Config | |
| PC4 | NIC | Auto Config | |
Objectives
Step 1: Determine IPv6 subnets and addressing scheme.
Step 2: Configure IPv6 addressing on routers and PCs.
Step 3: Verify IPv6 connectivity.
Background / Scenario
Network administrators must know how to implement IPv6 in their networks. You have been asked to set up a network for use by the sales staff for a customer demonstration. The network will use a series of consecutive IPv6 subnets for four LANs. Your job is to assign the subnets to the LANs and configure the routers and PCs with IPv6 addressing. Make certain to configure all the necessary components for IPv6 routing on the routers.
Instructions
Step 1: Determine IPv6 subnets and addressing scheme.
You have been given the IPv6 subnet 2001:db8:acad:00c8::/64 as the starting subnet. You will need four more subnets for each network that is required. Increment the subnet addresses consecutively by one to arrive at the four required subnets. Complete the table below.
Subnet Table
| Subnet | Address |
|---|---|
| R1 G0/0/ LAN | 2001:db8:acad:00c8::0/64 |
| R1 G0/1 LAN | 2001:db8:acad:00c9::0/64 |
| R2 G0/0 LAN | 2001:db8:acad:00ca::0/64 |
| R2 G0/1 LAN | 2001:db8:acad:00cb::0/64 |
| R1 to R2 link network | 2001:db8:acad:00cc::0/64 |
Step 2: Configure IPv6 addressing on routers and PCs.
Complete the addressing table above to use as a guide for configuring the devices.
- Assign the first IP address in the subnet to the router LAN interfaces.
- Assign the link-local addresses as designated in the addressing table.
- For the connection between the routers, assign the first address in the subnet to R1.
- For the connection between the routers, assign the second address in the subnet to R2.
- Set all four hosts to automatically configure with IPv6 addresses.
Step 3: Verify IPv6 connectivity.
The PCs should be able to ping each other if addressing has been configured properly.
Device Configuration
Router R1
enable
configure terminal
ipv6 unicast-routing
interface GigabitEthernet0/0
ipv6 address fe80::1 link-local
ipv6 address 2001:db8:acad:c8::1/64
no shutdown
interface GigabitEthernet0/1
ipv6 address fe80::1 link-local
ipv6 address 2001:db8:acad:c9::1/64
no shutdown
interface Serial0/0/0
ipv6 address fe80::1 link-local
ipv6 address 2001:db8:acad:cc::1/64
no shutdown
Router R2
enable
configure terminal
ipv6 unicast-routing
interface GigabitEthernet0/0
ipv6 address fe80::2 link-local
ipv6 address 2001:db8:acad:ca::1/64
no shutdown
interface GigabitEthernet0/1
ipv6 address fe80::2 link-local
ipv6 address 2001:db8:acad:cb::1/64
no shutdown
interface Serial0/0/0
ipv6 address fe80::2 link-local
ipv6 address 2001:db8:acad:cc::2/64
no shutdown
end
Download PDF & Packet Tracer File
[sociallocker id=”54558″]
12.9.1 Packet Tracer - Implement a Subnetted IPv6 Addressing Scheme - PKA 319.74 KB 1557 downloads
...
12.9.1 Packet Tracer - Implement a Subnetted IPv6 Addressing Scheme - PDF 112.23 KB 895 downloads
...[/sociallocker]
