10.4.3 Packet Tracer – Basic Device Configuration (Instructions Answer)

10.4.3 Packet Tracer – Basic Device Configuration Instructor Version

Instructor Note: Red font color or gray highlights indicate text that appears in the instructor copy only.

Topology

10.4.3 Packet Tracer – Basic Device Configuration

Addressing Table

Device	Interface	IP Address	Default Gateway
College	G0/0	128.107.20.1/24	N/A
	G0/0	2001:db8:a::1/64
	G0/0	FE80::1
	G0/1	128.107.30.1/24	N/A
	G0/1	2001:db8:b::1/64
	G0/1	FE80::1
Class-A	VLAN 1	128.107.20.2/24	128.107.20.1
Class-B	VLAN 1	128.107.30.15/24	128.107.30.1
Student-1	NIC	128.107.20.25/24	128.107.20.1
Student-1	NIC	2001:db8:a::2/64	FE80::1
Student-2	NIC	128.107.20.30/24	128.107.20.1
Student-2	NIC	2001:db8:a::3/64	FE80::1
Student-3	NIC	128.107.30.25/24	128.107.30.1
Student-3	NIC	2001:db8:b::2/64	FE80::1
Student-4	NIC	128.107.30.30/24	128.107.30.1
Student-4	NIC	2001:db8:b::3/64	FE80::1

Objectives

Complete the network documentation.
Perform basic device configurations on a router and a switch.
Verify connectivity and troubleshoot any issues.

Scenario

Your network manager is impressed with your performance in your job as a LAN technician. She would like you to demonstrate your ability to configure a router that connects two LANs. Your tasks include configuring basic settings on a router and a switch using the Cisco IOS. You will also configure IPv6 addresses on network devices and hosts. You will then verify the configurations by testing end-to-end connectivity. You goal is to establish connectivity between all devices.

Note: The VLAN1 interface on Class-A will not be reachable over IPv6.

In this activity you will configure the College router, Class-B switch, and the PC hosts.

Note: Packet Tracer will not score some configured values, however these values are required to accomplish full connectivity in the network.

Requirements

Provide the missing information in the Addressing Table.
Name the router College and the second switch Class-B. You will not be able to access the Class-A switch.
Use cisco as the user EXEC password for all lines.
Use class as the encrypted privileged EXEC password.
Encrypt all plaintext passwords.
Configure an appropriate banner.
Configure IPv4 and IPv6 addressing for the College switch according to the Addressing Table.
Configure IPv4 and IPv6 addressing for the Class-B switch according to the Addressing Table.
The hosts are partially configured. Complete the IPv4 addressing, and fully configure the IPv6 addresses according to the Addressing Table.
Document interfaces with descriptions, including the Class-B VLAN 1 interface.
Save your configurations.
Verify connectivity between all devices. All devices should be able to ping all other devices with IPv4 and IPv6.
Troubleshoot and document any issues.
Implement the solutions necessary to enable and verify full end-to-end connectivity.

Note: Click Check Results button to see your progress. Click the Reset Activity button to generate a new set of requirements

Answers Key

College Router

enable
config terminal
hostname College

enable secret class
line console 0
password cisco
login
line vty 0 15
password cisco
login
exit
service password-encryption

banner motd #Unauthorized access to this device is prohibited!#

interface g0/0
ip address 128.107.20.1 255.255.255.0
ipv6 address 2001:db8:a::1/64
ipv6 address FE80::1 link-local
description Link to Class-A
no shutdown

interface g0/1
ip address 128.107.30.1 255.255.255.0
ipv6 address 2001:db8:b::1/64
ipv6 address FE80::1 link-local
description Link to Class-B
no shutdown
exit

ipv6 unicast-routing
end
copy running-config startup-config

Class-B Switch

enable
configure terminal
hostname Class-B
banner motd #Unauthorized access to this device is prohibited!#

enable secret class
line console 0
password cisco
login
line vty 0 4
password cisco
login
exit
service password-encryption

interface vlan 1
description Vlan 1
ip address 128.107.30.15 255.255.255.0
no shutdown
end

copy running-config startup-config